Struct libp2p::websocket::BytesConnection

Begin the process of sending a value to the sink. Each call to this function must be preceded by a successful call to poll_ready which returned Poll::Ready(Ok(())). Read more

source

pub fn poll_flush(
self: Pin<&mut BytesConnection<T>>,
cx: &mut Context<'_>
) -> Poll<Result<(), Error>>

Flush any remaining output from this sink. Read more

source

pub fn poll_close(
self: Pin<&mut BytesConnection<T>>,
cx: &mut Context<'_>
) -> Poll<Result<(), Error>>

Flush any remaining output and close this sink, if necessary. Read more

source

impl<T> Stream for BytesConnection<T> where
T: 'static + AsyncRead + AsyncWrite + Send + Unpin,

type Item = Result<Vec<u8, Global>, Error>

Values yielded by the stream.

source

pub fn poll_next(
self: Pin<&mut BytesConnection<T>>,
cx: &mut Context<'_>
) -> Poll<Option<<BytesConnection<T> as Stream>::Item>>

Attempt to pull out the next value of this stream, registering the current task for wakeup if the value is not yet available, and returning None if the stream is exhausted. Read more

source

fn size_hint(&self) -> (usize, Option<usize>)

Returns the bounds on the remaining length of the stream. Read more

Auto Trait Implementations

impl<T> !RefUnwindSafe for BytesConnection<T>

impl<T> Send for BytesConnection<T> where
T: Send,

impl<T> !Sync for BytesConnection<T>

impl<T> Unpin for BytesConnection<T> where
T: Unpin,

impl<T> !UnwindSafe for BytesConnection<T>

Blanket Implementations

source

impl<T> Any for T where
T: 'static + ?Sized,

source

pub fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more

source

impl<T> Borrow<T> for T where
T: ?Sized,

const: unstable · source

pub fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more

source

impl<T> BorrowMut<T> for T where
T: ?Sized,

const: unstable · source

pub fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more

source

impl<T> From<T> for T

const: unstable · source

pub fn from(t: T) -> T

Returns the argument unchanged.

source

impl<T, U> Into for T where
U: From<T>,

const: unstable · source

pub fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

source

impl IntoStream for I where
I: Stream,

type Item = ::Item

The type of the elements being iterated over.

type IntoStream = I

Which kind of stream are we turning this into?

source

pub fn into_stream(self) -> I

Creates a stream from a value.

source

impl<T> Same<T> for T

type Output = T

Should always be Self

source

impl<T, Item> SinkExt<Item> for T where
T: Sink<Item> + ?Sized,

source

fn with<U, Fut, F, E>(self, f: F) -> With<Self, Item, U, Fut, F> where
 F: FnMut(U) -> Fut,
 Fut: Future<Output = Result<Item, E>>,
 E: From<Self::Error>,

Composes a function in front of the sink. Read more

source

fn with_flat_map<U, St, F>(self, f: F) -> WithFlatMap<Self, Item, U, St, F> where
F: FnMut(U) -> St,
St: Stream<Item = Result<Item, Self::Error>>,

Composes a function in front of the sink. Read more

source

fn sink_map_err<E, F>(self, f: F) -> SinkMapErr<Self, F> where
F: FnOnce(Self::Error) -> E,

Transforms the error returned by the sink.

source

fn sink_err_into<E>(self) -> SinkErrInto<Self, Item, E> where
Self::Error: Into<E>,

Map this sink’s error to a different error type using the Into trait. Read more

source

fn buffer(self, capacity: usize) -> Buffer<Self, Item>

Adds a fixed-size buffer to the current sink. Read more

source

fn close(&mut self) -> Close<'_, Self, Item> where
Self: Unpin,

Close the sink.

source

fn fanout<Si>(self, other: Si) -> Fanout<Self, Si> where
Item: Clone,
Si: Sink<Item, Error = Self::Error>,

Fanout items to multiple sinks. Read more

source

fn flush(&mut self) -> Flush<'_, Self, Item> where
Self: Unpin,

Flush the sink, processing all pending items. Read more

source

fn send(&mut self, item: Item) -> Send<'_, Self, Item> where
Self: Unpin,

A future that completes after the given item has been fully processed into the sink, including flushing. Read more

source

fn feed(&mut self, item: Item) -> Feed<'_, Self, Item> where
Self: Unpin,

A future that completes after the given item has been received by the sink. Read more

source

fn send_all<St>(&'a mut self, stream: &'a mut St) -> SendAll<'a, Self, St> where
St: TryStream<Ok = Item, Error = Self::Error> + Stream + Unpin + ?Sized,
Self: Unpin,

A future that completes after the given stream has been fully processed into the sink, including flushing. Read more

source

fn left_sink<Si2>(self) -> Either<Self, Si2> where
Si2: Sink<Item, Error = Self::Error>,

Wrap this sink in an Either sink, making it the left-hand variant of that Either. Read more

source

fn right_sink<Si1>(self) -> Either<Si1, Self> where
Si1: Sink<Item, Error = Self::Error>,

Wrap this stream in an Either stream, making it the right-hand variant of that Either. Read more

source

fn compat(self) -> CompatSink<Self, Item> where
Self: Unpin,

Wraps a Sink into a sink compatible with libraries using futures 0.1 Sink. Requires the compat feature to be enabled. Read more

source

fn poll_ready_unpin(
 &mut self,
 cx: &mut Context<'_>
) -> Poll<Result<(), Self::Error>> where
 Self: Unpin,

A convenience method for calling Sink::poll_ready on Unpin sink types. Read more

source

fn start_send_unpin(&mut self, item: Item) -> Result<(), Self::Error> where
Self: Unpin,

A convenience method for calling Sink::start_send on Unpin sink types. Read more

source

fn poll_flush_unpin(
 &mut self,
 cx: &mut Context<'_>
) -> Poll<Result<(), Self::Error>> where
 Self: Unpin,

A convenience method for calling Sink::poll_flush on Unpin sink types. Read more

source

fn poll_close_unpin(
 &mut self,
 cx: &mut Context<'_>
) -> Poll<Result<(), Self::Error>> where
 Self: Unpin,

A convenience method for calling Sink::poll_close on Unpin sink types. Read more

source

impl<T> StreamExt for T where
T: Stream + ?Sized,

source

fn next(&mut self) -> Next<'_, Self> where
Self: Unpin,

Creates a future that resolves to the next item in the stream. Read more

source

fn into_future(self) -> StreamFuture<Self> where
Self: Unpin,

Converts this stream into a future of (next_item, tail_of_stream). If the stream terminates, then the next item is None. Read more

source

fn map<T, F>(self, f: F) -> Map<Self, F> where
F: FnMut(Self::Item) -> T,

Maps this stream’s items to a different type, returning a new stream of the resulting type. Read more

source

fn enumerate(self) -> Enumerate<Self>

Creates a stream which gives the current iteration count as well as the next value. Read more

source

fn filter<Fut, F>(self, f: F) -> Filter<Self, Fut, F> where
F: FnMut(&Self::Item) -> Fut,
Fut: Future<Output = bool>,

Filters the values produced by this stream according to the provided asynchronous predicate. Read more

source

fn filter_map<Fut, T, F>(self, f: F) -> FilterMap<Self, Fut, F> where
F: FnMut(Self::Item) -> Fut,
Fut: Future<Output = Option<T>>,

Filters the values produced by this stream while simultaneously mapping them to a different type according to the provided asynchronous closure. Read more

source

fn then<Fut, F>(self, f: F) -> Then<Self, Fut, F> where
F: FnMut(Self::Item) -> Fut,
Fut: Future,

Computes from this stream’s items new items of a different type using an asynchronous closure. Read more

source

fn collect<C>(self) -> Collect<Self, C> where
C: Default + Extend<Self::Item>,

Transforms a stream into a collection, returning a future representing the result of that computation. Read more

source

fn unzip<A, B, FromA, FromB>(self) -> Unzip<Self, FromA, FromB> where
 FromA: Default + Extend<A>,
 FromB: Default + Extend,
 Self: Stream<Item = (A, B)>,

Converts a stream of pairs into a future, which resolves to pair of containers. Read more

source

fn concat(self) -> Concat<Self> where
 Self::Item: Extend<<Self::Item as IntoIterator>::Item>,
 Self::Item: IntoIterator,
 Self::Item: Default,

Concatenate all items of a stream into a single extendable destination, returning a future representing the end result. Read more

source

fn cycle(self) -> Cycle<Self> where
Self: Clone,

Repeats a stream endlessly. Read more

source

fn fold<T, Fut, F>(self, init: T, f: F) -> Fold<Self, Fut, T, F> where
F: FnMut(T, Self::Item) -> Fut,
Fut: Future<Output = T>,

Execute an accumulating asynchronous computation over a stream, collecting all the values into one final result. Read more

source

fn any<Fut, F>(self, f: F) -> Any<Self, Fut, F> where
F: FnMut(Self::Item) -> Fut,
Fut: Future<Output = bool>,

Execute predicate over asynchronous stream, and return true if any element in stream satisfied a predicate. Read more

source

fn all<Fut, F>(self, f: F) -> All<Self, Fut, F> where
F: FnMut(Self::Item) -> Fut,
Fut: Future<Output = bool>,

Execute predicate over asynchronous stream, and return true if all element in stream satisfied a predicate. Read more

source

fn flatten(self) -> Flatten<Self> where
Self::Item: Stream,

Flattens a stream of streams into just one continuous stream. Read more

source

fn flat_map<U, F>(self, f: F) -> FlatMap<Self, U, F> where
F: FnMut(Self::Item) -> U,
U: Stream,

Maps a stream like StreamExt::map but flattens nested Streams. Read more

source

fn scan<S, B, Fut, F>(self, initial_state: S, f: F) -> Scan<Self, S, Fut, F> where
F: FnMut(&mut S, Self::Item) -> Fut,
Fut: Future<Output = Option>,

Combinator similar to StreamExt::fold that holds internal state and produces a new stream. Read more

source

fn skip_while<Fut, F>(self, f: F) -> SkipWhile<Self, Fut, F> where
F: FnMut(&Self::Item) -> Fut,
Fut: Future<Output = bool>,

Skip elements on this stream while the provided asynchronous predicate resolves to true. Read more

source

fn take_while<Fut, F>(self, f: F) -> TakeWhile<Self, Fut, F> where
F: FnMut(&Self::Item) -> Fut,
Fut: Future<Output = bool>,

Take elements from this stream while the provided asynchronous predicate resolves to true. Read more

source

fn take_until<Fut>(self, fut: Fut) -> TakeUntil<Self, Fut> where
Fut: Future,

Take elements from this stream until the provided future resolves. Read more

source

fn for_each<Fut, F>(self, f: F) -> ForEach<Self, Fut, F> where
F: FnMut(Self::Item) -> Fut,
Fut: Future<Output = ()>,

Runs this stream to completion, executing the provided asynchronous closure for each element on the stream. Read more

source

fn for_each_concurrent<Fut, F>(
 self,
 limit: impl Into<Option<usize>>,
 f: F
) -> ForEachConcurrent<Self, Fut, F> where
 F: FnMut(Self::Item) -> Fut,
 Fut: Future<Output = ()>,

Runs this stream to completion, executing the provided asynchronous closure for each element on the stream concurrently as elements become available. Read more

source

fn take(self, n: usize) -> Take<Self>

Creates a new stream of at most n items of the underlying stream. Read more

source

fn skip(self, n: usize) -> Skip<Self>

Creates a new stream which skips n items of the underlying stream. Read more

source

fn fuse(self) -> Fuse<Self>

Fuse a stream such that poll_next will never again be called once it has finished. This method can be used to turn any Stream into a FusedStream. Read more

source

fn by_ref(&mut self) -> &mut Self

Borrows a stream, rather than consuming it. Read more

source

fn catch_unwind(self) -> CatchUnwind<Self> where
Self: UnwindSafe,

Catches unwinding panics while polling the stream. Read more

source

fn boxed<'a>(
self
) -> Pin<Box<dyn Stream<Item = Self::Item> + Send + 'a, Global>> where
Self: 'a + Send,

Wrap the stream in a Box, pinning it. Read more

source

fn boxed_local<'a>(self) -> Pin<Box<dyn Stream<Item = Self::Item> + 'a, Global>> where
Self: 'a,

Wrap the stream in a Box, pinning it. Read more

source

fn buffered(self, n: usize) -> Buffered<Self> where
Self::Item: Future,

An adaptor for creating a buffered list of pending futures. Read more

source

fn buffer_unordered(self, n: usize) -> BufferUnordered<Self> where
Self::Item: Future,

An adaptor for creating a buffered list of pending futures (unordered). Read more

source

fn zip<St>(self, other: St) -> Zip<Self, St> where
St: Stream,

An adapter for zipping two streams together. Read more

source

fn chain<St>(self, other: St) -> Chain<Self, St> where
St: Stream<Item = Self::Item>,

Adapter for chaining two streams. Read more

source

fn peekable(self) -> Peekable<Self>

Creates a new stream which exposes a peek method. Read more

source

fn chunks(self, capacity: usize) -> Chunks<Self>

An adaptor for chunking up items of the stream inside a vector. Read more

source

fn ready_chunks(self, capacity: usize) -> ReadyChunks<Self>

An adaptor for chunking up ready items of the stream inside a vector. Read more

source

fn forward<S>(self, sink: S) -> Forward<Self, S> where
S: Sink<Self::Ok, Error = Self::Error>,
Self: TryStream,

A future that completes after the given stream has been fully processed into the sink and the sink has been flushed and closed. Read more

source

fn split<Item>(self) -> (SplitSink<Self, Item>, SplitStream<Self>) where
Self: Sink<Item>,

Splits this Stream + Sink object into separate Sink and Stream objects. Read more

source

fn inspect<F>(self, f: F) -> Inspect<Self, F> where
F: FnMut(&Self::Item),

Do something with each item of this stream, afterwards passing it on. Read more

source

fn left_stream(self) -> Either<Self, B> where
B: Stream<Item = Self::Item>,

Wrap this stream in an Either stream, making it the left-hand variant of that Either. Read more

source

fn right_stream(self) -> Either<B, Self> where
B: Stream<Item = Self::Item>,

Wrap this stream in an Either stream, making it the right-hand variant of that Either. Read more

source

fn poll_next_unpin(&mut self, cx: &mut Context<'_>) -> Poll<Option<Self::Item>> where
Self: Unpin,

A convenience method for calling Stream::poll_next on Unpin stream types. Read more

source

fn select_next_some(&mut self) -> SelectNextSome<'_, Self> where
Self: Unpin + FusedStream,

Returns a Future that resolves when the next item in this stream is ready. Read more

source

impl<S> StreamExt for S where
S: Stream + ?Sized,

source

fn poll_next(&mut self, cx: &mut Context<'_>) -> Poll<Option<Self::Item>> where
Self: Unpin,

A convenience for calling Stream::poll_next() on !Unpin types.

source

fn next(&mut self) -> NextFuture<'_, Self> where
Self: Unpin,

Retrieves the next item in the stream. Read more

source

fn try_next<T, E>(&mut self) -> TryNextFuture<'_, Self> where
Self: Stream<Item = Result<T, E>> + Unpin,

Retrieves the next item in the stream. Read more

source

fn count(self) -> CountFuture<Self>

Counts the number of items in the stream. Read more

source

fn map<T, F>(self, f: F) -> Map<Self, F> where
F: FnMut(Self::Item) -> T,

Maps items of the stream to new values using a closure. Read more

source

fn flat_map<U, F>(self, f: F) -> FlatMap<Self, U, F> where
U: Stream,
F: FnMut(Self::Item) -> U,

Maps items to streams and then concatenates them. Read more

source

fn flatten(self) -> Flatten<Self> where
Self::Item: Stream,

Concatenates inner streams. Read more

source

fn then<F, Fut>(self, f: F) -> Then<Self, F, Fut> where
F: FnMut(Self::Item) -> Fut,
Fut: Future,

Maps items of the stream to new values using an async closure. Read more

source

fn filter(self, predicate: P) -> Filter<Self, P> where
P: FnMut(&Self::Item) -> bool,

Keeps items of the stream for which predicate returns true. Read more

source

fn filter_map<T, F>(self, f: F) -> FilterMap<Self, F> where
F: FnMut(Self::Item) -> Option<T>,

Filters and maps items of the stream using a closure. Read more

source

fn take(self, n: usize) -> Take<Self>

Takes only the first n items of the stream. Read more

source

fn take_while(self, predicate: P) -> TakeWhile<Self, P> where
P: FnMut(&Self::Item) -> bool,

Takes items while predicate returns true. Read more

source

fn skip(self, n: usize) -> Skip<Self>

Skips the first n items of the stream. Read more

source

fn skip_while(self, predicate: P) -> SkipWhile<Self, P> where
P: FnMut(&Self::Item) -> bool,

Skips items while predicate returns true. Read more

source

fn step_by(self, step: usize) -> StepBy<Self>

Yields every stepth item. Read more

source

fn chain(self, other: U) -> Chain<Self, U> where
U: Stream<Item = Self::Item>,

Appends another stream to the end of this one. Read more

source

fn cloned<'a, T>(self) -> Cloned<Self> where
Self: Stream<Item = &'a T>,
T: 'a + Clone,

Clones all items. Read more

source

fn copied<'a, T>(self) -> Copied<Self> where
Self: Stream<Item = &'a T>,
T: 'a + Copy,

Copies all items. Read more

source

fn collect<C>(self) -> CollectFuture<Self, C> where
C: Default + Extend<Self::Item>,

Collects all items in the stream into a collection. Read more

source

fn try_collect<T, E, C>(self) -> TryCollectFuture<Self, C> where
Self: Stream<Item = Result<T, E>>,
C: Default + Extend<T>,

Collects all items in the fallible stream into a collection. Read more

source

fn partition<B, P>(self, predicate: P) -> PartitionFuture<Self, P, B> where
B: Default + Extend<Self::Item>,
P: FnMut(&Self::Item) -> bool,

Partitions items into those for which predicate is true and those for which it is false, and then collects them into two collections. Read more

source

fn fold<T, F>(self, init: T, f: F) -> FoldFuture<Self, F, T> where
F: FnMut(T, Self::Item) -> T,

Accumulates a computation over the stream. Read more

source

fn try_fold<T, E, F, B>(
 &mut self,
 init: B,
 f: F
) -> TryFoldFuture<'_, Self, F, B> where
 Self: Stream<Item = Result<T, E>> + Unpin,
 F: FnMut(B, T) -> Result<B, E>,

Accumulates a fallible computation over the stream. Read more

source

fn scan<St, B, F>(self, initial_state: St, f: F) -> Scan<Self, St, F> where
F: FnMut(&mut St, Self::Item) -> Option,

Maps items of the stream to new values using a state value and a closure. Read more

source

fn fuse(self) -> Fuse<Self>

Fuses the stream so that it stops yielding items after the first None. Read more

source

fn cycle(self) -> Cycle<Self> where
Self: Clone,

Repeats the stream from beginning to end, forever. Read more

source

fn enumerate(self) -> Enumerate<Self>

Enumerates items, mapping them to (index, item). Read more

source

fn inspect<F>(self, f: F) -> Inspect<Self, F> where
F: FnMut(&Self::Item),

Calls a closure on each item and passes it on. Read more

source

fn nth(&mut self, n: usize) -> NthFuture<'_, Self> where
Self: Unpin,

Gets the nth item of the stream. Read more

source

fn last(self) -> LastFuture<Self>

Returns the last item in the stream. Read more

source

fn find(&mut self, predicate: P) -> FindFuture<'_, Self, P> where
Self: Unpin,
P: FnMut(&Self::Item) -> bool,

Finds the first item of the stream for which predicate returns true. Read more

source

fn find_map<F, B>(&mut self, f: F) -> FindMapFuture<'_, Self, F> where
Self: Unpin,
F: FnMut(Self::Item) -> Option,

Applies a closure to items in the stream and returns the first Some result. Read more

source

fn position(&mut self, predicate: P) -> PositionFuture<'_, Self, P> where
Self: Unpin,
P: FnMut(Self::Item) -> bool,

Finds the index of the first item of the stream for which predicate returns true. Read more

source

fn all(&mut self, predicate: P) -> AllFuture<'_, Self, P> where
Self: Unpin,
P: FnMut(Self::Item) -> bool,

Tests if predicate returns true for all items in the stream. Read more

source

fn any(&mut self, predicate: P) -> AnyFuture<'_, Self, P> where
Self: Unpin,
P: FnMut(Self::Item) -> bool,

Tests if predicate returns true for any item in the stream. Read more

source

fn for_each<F>(self, f: F) -> ForEachFuture<Self, F> where
F: FnMut(Self::Item),

Calls a closure on each item of the stream. Read more

source

fn try_for_each<F, E>(&mut self, f: F) -> TryForEachFuture<'_, Self, F> where
Self: Unpin,
F: FnMut(Self::Item) -> Result<(), E>,

Calls a fallible closure on each item of the stream, stopping on first error. Read more

source

fn zip(self, other: U) -> Zip<Self, U> where
U: Stream,

Zips up two streams into a single stream of pairs. Read more

source

fn unzip<A, B, FromA, FromB>(self) -> UnzipFuture<Self, FromA, FromB> where
 FromA: Default + Extend<A>,
 FromB: Default + Extend,
 Self: Stream<Item = (A, B)>,

Collects a stream of pairs into a pair of collections. Read more

source

fn or<S>(self, other: S) -> Or<Self, S> where
S: Stream<Item = Self::Item>,

Merges with other stream, preferring items from self whenever both streams are ready. Read more

source

fn race<S>(self, other: S) -> Race<Self, S> where
S: Stream<Item = Self::Item>,

Merges with other stream, with no preference for either stream when both are ready. Read more

source

fn boxed<'a>(
self
) -> Pin<Box<dyn Stream<Item = Self::Item> + Send + 'a, Global>> where
Self: 'a + Send,

Boxes the stream and changes its type to dyn Stream + Send + 'a. Read more

source

fn boxed_local<'a>(self) -> Pin<Box<dyn Stream<Item = Self::Item> + 'a, Global>> where
Self: 'a,

Boxes the stream and changes its type to dyn Stream + 'a. Read more

source

impl<T> StreamExt for T where
T: Stream + ?Sized,

source

fn next(&mut self) -> NextFuture<'_, Self> where
Self: Unpin,

Advances the stream and returns the next value. Read more

source

fn take(self, n: usize) -> Take<Self>

Creates a stream that yields its first n elements. Read more

source

fn take_while(self, predicate: P) -> TakeWhile<Self, P> where
P: FnMut(&Self::Item) -> bool,

Creates a stream that yields elements based on a predicate. Read more

source

fn throttle(self, d: Duration) -> Throttle<Self>

Limit the amount of items yielded per timeslice in a stream. Read more

source

fn step_by(self, step: usize) -> StepBy<Self>

Creates a stream that yields each stepth element. Read more

source

fn chain(self, other: U) -> Chain<Self, U> where
U: Stream<Item = Self::Item>,

Takes two streams and creates a new stream over both in sequence. Read more

source

fn cloned<'a, T>(self) -> Cloned<Self> where
Self: Stream<Item = &'a T>,
T: 'a + Clone,

Creates an stream which copies all of its elements. Read more

source

fn copied<'a, T>(self) -> Copied<Self> where
Self: Stream<Item = &'a T>,
T: 'a + Copy,

Creates an stream which copies all of its elements. Read more

source

fn cycle(self) -> Cycle<Self> where
Self: Clone,

Creates a stream that yields the provided values infinitely and in order. Read more

source

fn enumerate(self) -> Enumerate<Self>

Creates a stream that gives the current element’s count as well as the next value. Read more

source

fn delay(self, dur: Duration) -> Delay<Self>

Creates a stream that is delayed before it starts yielding items. Read more

source

fn map<B, F>(self, f: F) -> Map<Self, F> where
F: FnMut(Self::Item) -> B,

Takes a closure and creates a stream that calls that closure on every element of this stream. Read more

source

fn inspect<F>(self, f: F) -> Inspect<Self, F> where
F: FnMut(&Self::Item),

A combinator that does something with each element in the stream, passing the value on. Read more

source

fn last(self) -> LastFuture<Self, Self::Item>

Returns the last element of the stream. Read more

source

fn fuse(self) -> Fuse<Self>

Creates a stream which ends after the first None. Read more

source

fn filter(self, predicate: P) -> Filter<Self, P> where
P: FnMut(&Self::Item) -> bool,

Creates a stream that uses a predicate to determine if an element should be yielded. Read more

source

fn flat_map<U, F>(self, f: F) -> FlatMap<Self, U, F> where
U: IntoStream,
F: FnMut(Self::Item) -> U,

Creates an stream that works like map, but flattens nested structure. Read more

source

fn flatten(self) -> Flatten<Self> where
Self::Item: IntoStream,

Creates an stream that flattens nested structure. Read more

source

fn filter_map<B, F>(self, f: F) -> FilterMap<Self, F> where
F: FnMut(Self::Item) -> Option,

Both filters and maps a stream. Read more

source

fn min_by_key<B, F>(self, key_by: F) -> MinByKeyFuture<Self, Self::Item, F> where
B: Ord,
F: FnMut(&Self::Item) -> B,

Returns the element that gives the minimum value with respect to the specified key function. If several elements are equally minimum, the first element is returned. If the stream is empty, None is returned. Read more

source

fn max_by_key<B, F>(self, key_by: F) -> MaxByKeyFuture<Self, Self::Item, F> where
B: Ord,
F: FnMut(&Self::Item) -> B,

Returns the element that gives the maximum value with respect to the specified key function. If several elements are equally maximum, the first element is returned. If the stream is empty, None is returned. Read more

source

fn min_by<F>(self, compare: F) -> MinByFuture<Self, F, Self::Item> where
F: FnMut(&Self::Item, &Self::Item) -> Ordering,

Returns the element that gives the minimum value with respect to the specified comparison function. If several elements are equally minimum, the first element is returned. If the stream is empty, None is returned. Read more

source

fn max(self) -> MaxFuture<Self, Self::Item> where
Self::Item: Ord,

Returns the element that gives the maximum value. If several elements are equally maximum, the first element is returned. If the stream is empty, None is returned. Read more

source

fn min(self) -> MinFuture<Self, Self::Item> where
Self::Item: Ord,

Returns the element that gives the minimum value. If several elements are equally minimum, the first element is returned. If the stream is empty, None is returned. Read more

source

fn max_by<F>(self, compare: F) -> MaxByFuture<Self, F, Self::Item> where
F: FnMut(&Self::Item, &Self::Item) -> Ordering,

Returns the element that gives the maximum value with respect to the specified comparison function. If several elements are equally maximum, the first element is returned. If the stream is empty, None is returned. Read more

source

fn nth(&mut self, n: usize) -> NthFuture<'_, Self> where
Self: Unpin,

Returns the nth element of the stream. Read more

source

fn all<F>(&mut self, f: F) -> AllFuture<'_, Self, F, Self::Item> where
Self: Unpin,
F: FnMut(Self::Item) -> bool,

Tests if every element of the stream matches a predicate. Read more

source

fn find(&mut self, p: P) -> FindFuture<'_, Self, P> where
Self: Unpin,
P: FnMut(&Self::Item) -> bool,

Searches for an element in a stream that satisfies a predicate. Read more

source

fn find_map<F, B>(&mut self, f: F) -> FindMapFuture<'_, Self, F> where
Self: Unpin,
F: FnMut(Self::Item) -> Option,

Applies function to the elements of stream and returns the first non-none result. Read more

source

fn fold<B, F>(self, init: B, f: F) -> FoldFuture<Self, F, B> where
F: FnMut(B, Self::Item) -> B,

A combinator that applies a function to every element in a stream producing a single, final value. Read more

source

fn partition<B, F>(self, f: F) -> PartitionFuture<Self, F, B> where
F: FnMut(&Self::Item) -> bool,
B: Default + Extend<Self::Item>,

A combinator that applies a function to every element in a stream creating two collections from it. Read more

source

fn for_each<F>(self, f: F) -> ForEachFuture<Self, F> where
F: FnMut(Self::Item),

Call a closure on each element of the stream. Read more

source

fn any<F>(&mut self, f: F) -> AnyFuture<'_, Self, F, Self::Item> where
Self: Unpin,
F: FnMut(Self::Item) -> bool,

Tests if any element of the stream matches a predicate. Read more

source

fn by_ref(&mut self) -> &mut Self

Borrows an stream, rather than consuming it. Read more

source

fn scan<St, B, F>(self, initial_state: St, f: F) -> Scan<Self, St, F> where
F: FnMut(&mut St, Self::Item) -> Option,

A stream adaptor similar to fold that holds internal state and produces a new stream. Read more

source

fn skip_while(self, predicate: P) -> SkipWhile<Self, P> where
P: FnMut(&Self::Item) -> bool,

Combinator that skips elements based on a predicate. Read more

source

fn skip(self, n: usize) -> Skip<Self>

Creates a combinator that skips the first n elements. Read more

source

fn timeout(self, dur: Duration) -> Timeout<Self> where
Self: Stream,

Await a stream or times out after a duration of time. Read more

source

fn try_fold<B, F, T, E>(
 &mut self,
 init: T,
 f: F
) -> TryFoldFuture<'_, Self, F, T> where
 Self: Unpin,
 F: FnMut(B, Self::Item) -> Result<T, E>,

A combinator that applies a function as long as it returns successfully, producing a single, final value. Immediately returns the error when the function returns unsuccessfully. Read more

source

fn try_for_each<F, E>(&mut self, f: F) -> TryForEachFuture<'_, Self, F> where
Self: Unpin,
F: FnMut(Self::Item) -> Result<(), E>,

Applies a falliable function to each element in a stream, stopping at first error and returning it. Read more

source

fn zip(self, other: U) -> Zip<Self, U> where
U: Stream,

‘Zips up’ two streams into a single stream of pairs. Read more

source

fn unzip<A, B, FromA, FromB>(self) -> UnzipFuture<Self, FromA, FromB> where
 FromA: Default + Extend<A>,
 FromB: Default + Extend,
 Self: Stream<Item = (A, B)>,

Converts an stream of pairs into a pair of containers. Read more

source

fn collect<'a, B>(self) -> Pin<Box<dyn Future<Output = B> + Send + 'a, Global>> where
 Self: 'a + Send,
 B: FromStream<Self::Item>,
 Self::Item: Send,

Transforms a stream into a collection. Read more

source

fn merge(self, other: U) -> Merge<Self, U> where
U: Stream<Item = Self::Item>,

Combines multiple streams into a single stream of all their outputs. Read more

source

fn partial_cmp<S>(self, other: S) -> PartialCmpFuture<Self, S> where
 Self: Stream,
 S: Stream,
 Self::Item: PartialOrd<<S as Stream>::Item>,

Lexicographically compares the elements of this Stream with those of another. Read more

source

fn position(&mut self, predicate: P) -> PositionFuture<'_, Self, P> where
Self: Unpin,
P: FnMut(Self::Item) -> bool,

Searches for an element in a Stream that satisfies a predicate, returning its index. Read more

source

fn cmp<S>(self, other: S) -> CmpFuture<Self, S> where
 Self: Stream,
 S: Stream,
 Self::Item: Ord,

Lexicographically compares the elements of this Stream with those of another using ‘Ord’. Read more

source

fn count(self) -> CountFuture<Self>

Counts the number of elements in the stream. Read more

source

fn ne<S>(self, other: S) -> NeFuture<Self, S> where
S: Stream,
Self::Item: PartialEq<<S as Stream>::Item>,

Determines if the elements of this Stream are lexicographically not equal to those of another. Read more

source

fn ge<S>(self, other: S) -> GeFuture<Self, S> where
 Self: Stream,
 S: Stream,
 Self::Item: PartialOrd<<S as Stream>::Item>,

Determines if the elements of this Stream are lexicographically greater than or equal to those of another. Read more

source

fn eq<S>(self, other: S) -> EqFuture<Self, S> where
 Self: Stream,
 S: Stream,
 Self::Item: PartialEq<<S as Stream>::Item>,

Determines if the elements of this Stream are lexicographically equal to those of another. Read more

source

fn gt<S>(self, other: S) -> GtFuture<Self, S> where
 Self: Stream,
 S: Stream,
 Self::Item: PartialOrd<<S as Stream>::Item>,

Determines if the elements of this Stream are lexicographically greater than those of another. Read more

source

fn le<S>(self, other: S) -> LeFuture<Self, S> where
 Self: Stream,
 S: Stream,
 Self::Item: PartialOrd<<S as Stream>::Item>,

Determines if the elements of this Stream are lexicographically less or equal to those of another. Read more

source

fn lt<S>(self, other: S) -> LtFuture<Self, S> where
 Self: Stream,
 S: Stream,
 Self::Item: PartialOrd<<S as Stream>::Item>,

Determines if the elements of this Stream are lexicographically less than those of another. Read more

source

fn sum<'a, S>(self) -> Pin<Box<dyn Future<Output = S> + 'a, Global>> where
Self: 'a + Stream<Item = S>,
S: Sum<Self::Item>,

Sums the elements of a stream. Read more

source

fn product<'a, P>(self) -> Pin<Box<dyn Future<Output = P> + 'a, Global>> where
Self: 'a + Stream<Item = P>,
P: Product,

Multiplies all elements of the stream. Read more

source

impl<T, U> TryFrom for T where
U: Into<T>,

type Error = Infallible

The type returned in the event of a conversion error.

const: unstable · source

pub fn try_from(value: U) -> Result<T, <T as TryFrom>::Error>

Performs the conversion.

source

impl<T, U> TryInto for T where
U: TryFrom<T>,

type Error = >::Error

The type returned in the event of a conversion error.

const: unstable · source

pub fn try_into(self) -> Result<U, >::Error>

Performs the conversion.

source

impl<S, T, E> TryStream for S where
S: Stream<Item = Result<T, E>> + ?Sized,

type Ok = T

The type of successful values yielded by this future

type Error = E

The type of failures yielded by this future

source

pub fn try_poll_next(
self: Pin<&mut S>,
cx: &mut Context<'_>
) -> Poll<Option<Result<<S as TryStream>::Ok, <S as TryStream>::Error>>>

Poll this TryStream as if it were a Stream. Read more

source

impl<S> TryStreamExt for S where
S: TryStream + ?Sized,

source

fn err_into<E>(self) -> ErrInto<Self, E> where
Self::Error: Into<E>,

Wraps the current stream in a new stream which converts the error type into the one provided. Read more

source

fn map_ok<T, F>(self, f: F) -> MapOk<Self, F> where
F: FnMut(Self::Ok) -> T,

Wraps the current stream in a new stream which maps the success value using the provided closure. Read more

source

fn map_err<E, F>(self, f: F) -> MapErr<Self, F> where
F: FnMut(Self::Error) -> E,

Wraps the current stream in a new stream which maps the error value using the provided closure. Read more

source

fn and_then<Fut, F>(self, f: F) -> AndThen<Self, Fut, F> where
F: FnMut(Self::Ok) -> Fut,
Fut: TryFuture<Error = Self::Error>,

Chain on a computation for when a value is ready, passing the successful results to the provided closure f. Read more

source

fn or_else<Fut, F>(self, f: F) -> OrElse<Self, Fut, F> where
F: FnMut(Self::Error) -> Fut,
Fut: TryFuture<Ok = Self::Ok>,

Chain on a computation for when an error happens, passing the erroneous result to the provided closure f. Read more

source

fn inspect_ok<F>(self, f: F) -> InspectOk<Self, F> where
F: FnMut(&Self::Ok),

Do something with the success value of this stream, afterwards passing it on. Read more

source

fn inspect_err<F>(self, f: F) -> InspectErr<Self, F> where
F: FnMut(&Self::Error),

Do something with the error value of this stream, afterwards passing it on. Read more

source

fn into_stream(self) -> IntoStream<Self>

Wraps a TryStream into a type that implements Stream Read more

source

fn try_next(&mut self) -> TryNext<'_, Self> where
Self: Unpin,

Creates a future that attempts to resolve the next item in the stream. If an error is encountered before the next item, the error is returned instead. Read more

source

fn try_for_each<Fut, F>(self, f: F) -> TryForEach<Self, Fut, F> where
F: FnMut(Self::Ok) -> Fut,
Fut: TryFuture<Ok = (), Error = Self::Error>,

Attempts to run this stream to completion, executing the provided asynchronous closure for each element on the stream. Read more

source

fn try_skip_while<Fut, F>(self, f: F) -> TrySkipWhile<Self, Fut, F> where
F: FnMut(&Self::Ok) -> Fut,
Fut: TryFuture<Ok = bool, Error = Self::Error>,

Skip elements on this stream while the provided asynchronous predicate resolves to true. Read more

source

fn try_take_while<Fut, F>(self, f: F) -> TryTakeWhile<Self, Fut, F> where
F: FnMut(&Self::Ok) -> Fut,
Fut: TryFuture<Ok = bool, Error = Self::Error>,

Take elements on this stream while the provided asynchronous predicate resolves to true. Read more

source

fn try_for_each_concurrent<Fut, F>(
 self,
 limit: impl Into<Option<usize>>,
 f: F
) -> TryForEachConcurrent<Self, Fut, F> where
 F: FnMut(Self::Ok) -> Fut,
 Fut: Future<Output = Result<(), Self::Error>>,

Attempts to run this stream to completion, executing the provided asynchronous closure for each element on the stream concurrently as elements become available, exiting as soon as an error occurs. Read more

source

fn try_collect<C>(self) -> TryCollect<Self, C> where
C: Default + Extend<Self::Ok>,

Attempt to transform a stream into a collection, returning a future representing the result of that computation. Read more

source

fn try_chunks(self, capacity: usize) -> TryChunks<Self>

An adaptor for chunking up successful items of the stream inside a vector. Read more

source

fn try_filter<Fut, F>(self, f: F) -> TryFilter<Self, Fut, F> where
Fut: Future<Output = bool>,
F: FnMut(&Self::Ok) -> Fut,

Attempt to filter the values produced by this stream according to the provided asynchronous closure. Read more

source

fn try_filter_map<Fut, F, T>(self, f: F) -> TryFilterMap<Self, Fut, F> where
Fut: TryFuture<Ok = Option<T>, Error = Self::Error>,
F: FnMut(Self::Ok) -> Fut,

Attempt to filter the values produced by this stream while simultaneously mapping them to a different type according to the provided asynchronous closure. Read more

source

fn try_flatten(self) -> TryFlatten<Self> where
Self::Ok: TryStream,
<Self::Ok as TryStream>::Error: From<Self::Error>,

Flattens a stream of streams into just one continuous stream. Read more

source

fn try_fold<T, Fut, F>(self, init: T, f: F) -> TryFold<Self, Fut, T, F> where
F: FnMut(T, Self::Ok) -> Fut,
Fut: TryFuture<Ok = T, Error = Self::Error>,

Attempt to execute an accumulating asynchronous computation over a stream, collecting all the values into one final result. Read more

source

fn try_concat(self) -> TryConcat<Self> where
 Self::Ok: Extend<<Self::Ok as IntoIterator>::Item>,
 Self::Ok: IntoIterator,
 Self::Ok: Default,

Attempt to concatenate all items of a stream into a single extendable destination, returning a future representing the end result. Read more

source

fn try_buffer_unordered(self, n: usize) -> TryBufferUnordered<Self> where
Self::Ok: TryFuture,
<Self::Ok as TryFuture>::Error == Self::Error,

Attempt to execute several futures from a stream concurrently (unordered). Read more

source

fn try_buffered(self, n: usize) -> TryBuffered<Self> where
Self::Ok: TryFuture,
<Self::Ok as TryFuture>::Error == Self::Error,

Attempt to execute several futures from a stream concurrently. Read more

source

fn try_poll_next_unpin(
 &mut self,
 cx: &mut Context<'_>
) -> Poll<Option<Result<Self::Ok, Self::Error>>> where
 Self: Unpin,

A convenience method for calling TryStream::try_poll_next on Unpin stream types. Read more

source

fn compat(self) -> Compat<Self> where
Self: Unpin,

Wraps a TryStream into a stream compatible with libraries using futures 0.1 Stream. Requires the compat feature to be enabled. Read more

source

fn into_async_read(self) -> IntoAsyncRead<Self> where
Self: TryStreamExt<Error = Error> + Unpin,
Self::Ok: AsRef<[u8 ]>,

Adapter that converts this stream into an AsyncRead. Read more

source

impl<S> TryStreamExt for S where
S: TryStream,

source

fn timeout(self, dur: Duration) -> TimeoutStream<Self> where
Self::Error: From<Error>,

Creates a new stream which will take at most dur time to yield each item of the stream. Read more

source

impl<V, T> VZip<V> for T where
V: MultiLane<T>,

source

Struct libp2p::websocket::BytesConnection

Trait Implementations

impl<T> Debug for BytesConnection<T> where T: Debug,

pub fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

impl<T> Sink<Vec<u8, Global>> for BytesConnection<T> where T: 'static + AsyncRead + AsyncWrite + Send + Unpin,

type Error = Error

pub fn poll_ready( self: Pin<&mut BytesConnection<T>>, cx: &mut Context<'_>) -> Poll<Result<(), Error>>

pub fn start_send( self: Pin<&mut BytesConnection<T>>, item: Vec<u8, Global>) -> Result<(), Error>

pub fn poll_flush( self: Pin<&mut BytesConnection<T>>, cx: &mut Context<'_>) -> Poll<Result<(), Error>>

pub fn poll_close( self: Pin<&mut BytesConnection<T>>, cx: &mut Context<'_>) -> Poll<Result<(), Error>>

impl<T> Stream for BytesConnection<T> where T: 'static + AsyncRead + AsyncWrite + Send + Unpin,

type Item = Result<Vec<u8, Global>, Error>

pub fn poll_next( self: Pin<&mut BytesConnection<T>>, cx: &mut Context<'_>) -> Poll<Option<<BytesConnection<T> as Stream>::Item>>

fn size_hint(&self) -> (usize, Option<usize>)

Auto Trait Implementations

impl<T> !RefUnwindSafe for BytesConnection<T>

impl<T> Send for BytesConnection<T> where T: Send,

impl<T> !Sync for BytesConnection<T>

impl<T> Unpin for BytesConnection<T> where T: Unpin,

impl<T> !UnwindSafe for BytesConnection<T>

Blanket Implementations

impl<T> Any for T where T: 'static + ?Sized,

pub fn type_id(&self) -> TypeId

impl<T> Borrow<T> for T where T: ?Sized,

pub fn borrow(&self) -> &T

impl<T> BorrowMut<T> for T where T: ?Sized,

pub fn borrow_mut(&mut self) -> &mut T

impl<T> From<T> for T

pub fn from(t: T) -> T

impl<T, U> Into<U> for T where U: From<T>,

pub fn into(self) -> U

impl<I> IntoStream for I where I: Stream,

type Item = <I as Stream>::Item

type IntoStream = I

pub fn into_stream(self) -> I

impl<T> Same<T> for T

type Output = T

impl<T, Item> SinkExt<Item> for T where T: Sink<Item> + ?Sized,

fn with<U, Fut, F, E>(self, f: F) -> With<Self, Item, U, Fut, F> where F: FnMut(U) -> Fut, Fut: Future<Output = Result<Item, E>>, E: From<Self::Error>,

fn with_flat_map<U, St, F>(self, f: F) -> WithFlatMap<Self, Item, U, St, F> where F: FnMut(U) -> St, St: Stream<Item = Result<Item, Self::Error>>,

fn sink_map_err<E, F>(self, f: F) -> SinkMapErr<Self, F> where F: FnOnce(Self::Error) -> E,

fn sink_err_into<E>(self) -> SinkErrInto<Self, Item, E> where Self::Error: Into<E>,

fn buffer(self, capacity: usize) -> Buffer<Self, Item>

fn close(&mut self) -> Close<'_, Self, Item> where Self: Unpin,

fn fanout<Si>(self, other: Si) -> Fanout<Self, Si> where Item: Clone, Si: Sink<Item, Error = Self::Error>,

fn flush(&mut self) -> Flush<'_, Self, Item> where Self: Unpin,

fn send(&mut self, item: Item) -> Send<'_, Self, Item> where Self: Unpin,

fn feed(&mut self, item: Item) -> Feed<'_, Self, Item> where Self: Unpin,

fn send_all<St>(&'a mut self, stream: &'a mut St) -> SendAll<'a, Self, St> where St: TryStream<Ok = Item, Error = Self::Error> + Stream + Unpin + ?Sized, Self: Unpin,

fn left_sink<Si2>(self) -> Either<Self, Si2> where Si2: Sink<Item, Error = Self::Error>,

fn right_sink<Si1>(self) -> Either<Si1, Self> where Si1: Sink<Item, Error = Self::Error>,

fn compat(self) -> CompatSink<Self, Item> where Self: Unpin,

fn poll_ready_unpin( &mut self, cx: &mut Context<'_>) -> Poll<Result<(), Self::Error>> where Self: Unpin,

fn start_send_unpin(&mut self, item: Item) -> Result<(), Self::Error> where Self: Unpin,

fn poll_flush_unpin( &mut self, cx: &mut Context<'_>) -> Poll<Result<(), Self::Error>> where Self: Unpin,

fn poll_close_unpin( &mut self, cx: &mut Context<'_>) -> Poll<Result<(), Self::Error>> where Self: Unpin,

impl<T> StreamExt for T where T: Stream + ?Sized,

fn next(&mut self) -> Next<'_, Self> where Self: Unpin,

fn into_future(self) -> StreamFuture<Self> where Self: Unpin,

fn map<T, F>(self, f: F) -> Map<Self, F> where F: FnMut(Self::Item) -> T,

fn enumerate(self) -> Enumerate<Self>

fn filter<Fut, F>(self, f: F) -> Filter<Self, Fut, F> where F: FnMut(&Self::Item) -> Fut, Fut: Future<Output = bool>,

fn filter_map<Fut, T, F>(self, f: F) -> FilterMap<Self, Fut, F> where F: FnMut(Self::Item) -> Fut, Fut: Future<Output = Option<T>>,

fn then<Fut, F>(self, f: F) -> Then<Self, Fut, F> where F: FnMut(Self::Item) -> Fut, Fut: Future,

fn collect<C>(self) -> Collect<Self, C> where C: Default + Extend<Self::Item>,

fn unzip<A, B, FromA, FromB>(self) -> Unzip<Self, FromA, FromB> where FromA: Default + Extend<A>, FromB: Default + Extend<B>, Self: Stream<Item = (A, B)>,

fn concat(self) -> Concat<Self> where Self::Item: Extend<<Self::Item as IntoIterator>::Item>, Self::Item: IntoIterator, Self::Item: Default,

fn cycle(self) -> Cycle<Self> where Self: Clone,

fn fold<T, Fut, F>(self, init: T, f: F) -> Fold<Self, Fut, T, F> where F: FnMut(T, Self::Item) -> Fut, Fut: Future<Output = T>,

fn any<Fut, F>(self, f: F) -> Any<Self, Fut, F> where F: FnMut(Self::Item) -> Fut, Fut: Future<Output = bool>,

fn all<Fut, F>(self, f: F) -> All<Self, Fut, F> where F: FnMut(Self::Item) -> Fut, Fut: Future<Output = bool>,

fn flatten(self) -> Flatten<Self> where Self::Item: Stream,

fn flat_map<U, F>(self, f: F) -> FlatMap<Self, U, F> where F: FnMut(Self::Item) -> U, U: Stream,

fn scan<S, B, Fut, F>(self, initial_state: S, f: F) -> Scan<Self, S, Fut, F> where F: FnMut(&mut S, Self::Item) -> Fut, Fut: Future<Output = Option<B>>,

fn skip_while<Fut, F>(self, f: F) -> SkipWhile<Self, Fut, F> where F: FnMut(&Self::Item) -> Fut, Fut: Future<Output = bool>,

fn take_while<Fut, F>(self, f: F) -> TakeWhile<Self, Fut, F> where F: FnMut(&Self::Item) -> Fut, Fut: Future<Output = bool>,

fn take_until<Fut>(self, fut: Fut) -> TakeUntil<Self, Fut> where Fut: Future,

fn for_each<Fut, F>(self, f: F) -> ForEach<Self, Fut, F> where F: FnMut(Self::Item) -> Fut, Fut: Future<Output = ()>,

fn for_each_concurrent<Fut, F>( self, limit: impl Into<Option<usize>>, f: F) -> ForEachConcurrent<Self, Fut, F> where F: FnMut(Self::Item) -> Fut, Fut: Future<Output = ()>,

fn take(self, n: usize) -> Take<Self>

impl<T> Debug for BytesConnection<T> where
T: Debug,

impl<T> Sink<Vec<u8, Global>> for BytesConnection<T> where
T: 'static + AsyncRead + AsyncWrite + Send + Unpin,

pub fn poll_ready(
self: Pin<&mut BytesConnection<T>>,
cx: &mut Context<'_>
) -> Poll<Result<(), Error>>

pub fn start_send(
self: Pin<&mut BytesConnection<T>>,
item: Vec<u8, Global>
) -> Result<(), Error>

pub fn poll_flush(
self: Pin<&mut BytesConnection<T>>,
cx: &mut Context<'_>
) -> Poll<Result<(), Error>>

pub fn poll_close(
self: Pin<&mut BytesConnection<T>>,
cx: &mut Context<'_>
) -> Poll<Result<(), Error>>

impl<T> Stream for BytesConnection<T> where
T: 'static + AsyncRead + AsyncWrite + Send + Unpin,

pub fn poll_next(
self: Pin<&mut BytesConnection<T>>,
cx: &mut Context<'_>
) -> Poll<Option<<BytesConnection<T> as Stream>::Item>>

impl<T> Send for BytesConnection<T> where
T: Send,

impl<T> Unpin for BytesConnection<T> where
T: Unpin,

impl<T> Any for T where
T: 'static + ?Sized,

impl<T> Borrow<T> for T where
T: ?Sized,

impl<T> BorrowMut<T> for T where
T: ?Sized,

impl<T, U> Into<U> for T where
U: From<T>,

impl<I> IntoStream for I where
I: Stream,

impl<T, Item> SinkExt<Item> for T where
T: Sink<Item> + ?Sized,

fn with<U, Fut, F, E>(self, f: F) -> With<Self, Item, U, Fut, F> where
F: FnMut(U) -> Fut,
Fut: Future<Output = Result<Item, E>>,
E: From<Self::Error>,

fn with_flat_map<U, St, F>(self, f: F) -> WithFlatMap<Self, Item, U, St, F> where
F: FnMut(U) -> St,
St: Stream<Item = Result<Item, Self::Error>>,

fn sink_map_err<E, F>(self, f: F) -> SinkMapErr<Self, F> where
F: FnOnce(Self::Error) -> E,

fn sink_err_into<E>(self) -> SinkErrInto<Self, Item, E> where
Self::Error: Into<E>,

fn close(&mut self) -> Close<'_, Self, Item> where
Self: Unpin,

fn fanout<Si>(self, other: Si) -> Fanout<Self, Si> where
Item: Clone,
Si: Sink<Item, Error = Self::Error>,

fn flush(&mut self) -> Flush<'_, Self, Item> where
Self: Unpin,

fn send(&mut self, item: Item) -> Send<'_, Self, Item> where
Self: Unpin,

fn feed(&mut self, item: Item) -> Feed<'_, Self, Item> where
Self: Unpin,

fn send_all<St>(&'a mut self, stream: &'a mut St) -> SendAll<'a, Self, St> where
St: TryStream<Ok = Item, Error = Self::Error> + Stream + Unpin + ?Sized,
Self: Unpin,

fn left_sink<Si2>(self) -> Either<Self, Si2> where
Si2: Sink<Item, Error = Self::Error>,

fn right_sink<Si1>(self) -> Either<Si1, Self> where
Si1: Sink<Item, Error = Self::Error>,

fn compat(self) -> CompatSink<Self, Item> where
Self: Unpin,

fn poll_ready_unpin(
&mut self,
cx: &mut Context<'_>
) -> Poll<Result<(), Self::Error>> where
Self: Unpin,

fn start_send_unpin(&mut self, item: Item) -> Result<(), Self::Error> where
Self: Unpin,

fn poll_flush_unpin(
&mut self,
cx: &mut Context<'_>
) -> Poll<Result<(), Self::Error>> where
Self: Unpin,

fn poll_close_unpin(
&mut self,
cx: &mut Context<'_>
) -> Poll<Result<(), Self::Error>> where
Self: Unpin,

impl<T> StreamExt for T where
T: Stream + ?Sized,

fn next(&mut self) -> Next<'_, Self> where
Self: Unpin,

fn into_future(self) -> StreamFuture<Self> where
Self: Unpin,

fn map<T, F>(self, f: F) -> Map<Self, F> where
F: FnMut(Self::Item) -> T,

fn filter<Fut, F>(self, f: F) -> Filter<Self, Fut, F> where
F: FnMut(&Self::Item) -> Fut,
Fut: Future<Output = bool>,

fn filter_map<Fut, T, F>(self, f: F) -> FilterMap<Self, Fut, F> where
F: FnMut(Self::Item) -> Fut,
Fut: Future<Output = Option<T>>,

fn then<Fut, F>(self, f: F) -> Then<Self, Fut, F> where
F: FnMut(Self::Item) -> Fut,
Fut: Future,

fn collect<C>(self) -> Collect<Self, C> where
C: Default + Extend<Self::Item>,

fn unzip<A, B, FromA, FromB>(self) -> Unzip<Self, FromA, FromB> where
FromA: Default + Extend<A>,
FromB: Default + Extend<B>,
Self: Stream<Item = (A, B)>,

fn concat(self) -> Concat<Self> where
Self::Item: Extend<<Self::Item as IntoIterator>::Item>,
Self::Item: IntoIterator,
Self::Item: Default,

fn cycle(self) -> Cycle<Self> where
Self: Clone,

fn fold<T, Fut, F>(self, init: T, f: F) -> Fold<Self, Fut, T, F> where
F: FnMut(T, Self::Item) -> Fut,
Fut: Future<Output = T>,

fn any<Fut, F>(self, f: F) -> Any<Self, Fut, F> where
F: FnMut(Self::Item) -> Fut,
Fut: Future<Output = bool>,

fn all<Fut, F>(self, f: F) -> All<Self, Fut, F> where
F: FnMut(Self::Item) -> Fut,
Fut: Future<Output = bool>,

fn flatten(self) -> Flatten<Self> where
Self::Item: Stream,

fn flat_map<U, F>(self, f: F) -> FlatMap<Self, U, F> where
F: FnMut(Self::Item) -> U,
U: Stream,

fn scan<S, B, Fut, F>(self, initial_state: S, f: F) -> Scan<Self, S, Fut, F> where
F: FnMut(&mut S, Self::Item) -> Fut,
Fut: Future<Output = Option<B>>,

fn skip_while<Fut, F>(self, f: F) -> SkipWhile<Self, Fut, F> where
F: FnMut(&Self::Item) -> Fut,
Fut: Future<Output = bool>,

fn take_while<Fut, F>(self, f: F) -> TakeWhile<Self, Fut, F> where
F: FnMut(&Self::Item) -> Fut,
Fut: Future<Output = bool>,

fn take_until<Fut>(self, fut: Fut) -> TakeUntil<Self, Fut> where
Fut: Future,

fn for_each<Fut, F>(self, f: F) -> ForEach<Self, Fut, F> where
F: FnMut(Self::Item) -> Fut,
Fut: Future<Output = ()>,

fn for_each_concurrent<Fut, F>(
self,
limit: impl Into<Option<usize>>,
f: F
) -> ForEachConcurrent<Self, Fut, F> where
F: FnMut(Self::Item) -> Fut,
Fut: Future<Output = ()>,

fn catch_unwind(self) -> CatchUnwind<Self> where
Self: UnwindSafe,

fn boxed<'a>(
self
) -> Pin<Box<dyn Stream<Item = Self::Item> + Send + 'a, Global>> where
Self: 'a + Send,

fn boxed_local<'a>(self) -> Pin<Box<dyn Stream<Item = Self::Item> + 'a, Global>> where
Self: 'a,

fn buffered(self, n: usize) -> Buffered<Self> where
Self::Item: Future,

fn buffer_unordered(self, n: usize) -> BufferUnordered<Self> where
Self::Item: Future,

fn zip<St>(self, other: St) -> Zip<Self, St> where
St: Stream,

fn chain<St>(self, other: St) -> Chain<Self, St> where
St: Stream<Item = Self::Item>,

fn forward<S>(self, sink: S) -> Forward<Self, S> where
S: Sink<Self::Ok, Error = Self::Error>,
Self: TryStream,

fn split<Item>(self) -> (SplitSink<Self, Item>, SplitStream<Self>) where
Self: Sink<Item>,

fn inspect<F>(self, f: F) -> Inspect<Self, F> where
F: FnMut(&Self::Item),

fn left_stream<B>(self) -> Either<Self, B> where
B: Stream<Item = Self::Item>,

fn right_stream<B>(self) -> Either<B, Self> where
B: Stream<Item = Self::Item>,

fn poll_next_unpin(&mut self, cx: &mut Context<'_>) -> Poll<Option<Self::Item>> where
Self: Unpin,

fn select_next_some(&mut self) -> SelectNextSome<'_, Self> where
Self: Unpin + FusedStream,

impl<S> StreamExt for S where
S: Stream + ?Sized,

fn poll_next(&mut self, cx: &mut Context<'_>) -> Poll<Option<Self::Item>> where
Self: Unpin,

fn next(&mut self) -> NextFuture<'_, Self> where
Self: Unpin,

fn try_next<T, E>(&mut self) -> TryNextFuture<'_, Self> where
Self: Stream<Item = Result<T, E>> + Unpin,

fn map<T, F>(self, f: F) -> Map<Self, F> where
F: FnMut(Self::Item) -> T,

fn flat_map<U, F>(self, f: F) -> FlatMap<Self, U, F> where
U: Stream,
F: FnMut(Self::Item) -> U,

fn flatten(self) -> Flatten<Self> where
Self::Item: Stream,

fn then<F, Fut>(self, f: F) -> Then<Self, F, Fut> where
F: FnMut(Self::Item) -> Fut,
Fut: Future,

fn filter<P>(self, predicate: P) -> Filter<Self, P> where
P: FnMut(&Self::Item) -> bool,

fn filter_map<T, F>(self, f: F) -> FilterMap<Self, F> where
F: FnMut(Self::Item) -> Option<T>,

fn take_while<P>(self, predicate: P) -> TakeWhile<Self, P> where
P: FnMut(&Self::Item) -> bool,